Archive EOL Products

Discontinued Product

Please note that this product is no longer available.
The following document is solely for documentation purposes of the discontinued product with the status "End of Life".

Do you have questions about this product? Please contact us either by email at anfrage@rosch-computer.de or by phone at +49 6122 17071 50.

Datenblatt aus dem Archiv, Stand 24.10.2008

IBASE

ECX810-12
ECX Industrie Mainboard Intel EP80579 1200MHz (lüfterlos), 3 x G-LAN, 2 x CAN Bus, CF und 4 x Seriell


Produkt ist EOL (End Of Life)!
Kein Produktnachfolger bekannt.



EMB-ECX810-12
Abb. 1: Symbolfoto


EMB-ECX810-12
Abb. 2: Ansicht mit ID810 VGA Modul


Technische Daten (Art.-Nr: EMB-ECX810-12, Ref.-ID: ECX810-12):
Allgemein  ECX Industrie Mainboard Intel EP80579 1200MHz (lüfterlos), 3 x G-LAN, 2 x CAN Bus, CF und 4 x Seriell
Formfaktor  ECX
Prozessor  Intel EP80579 (Tolapai) 1.2GHz onboard.
FSB  400 MHz
Speicher  1 x 200 Pin SO-DIMM Sockel für bis zu 2GB DDR2 SDRAM
ECC  Nein
Cache  256 KB
Chipsatz  Intel EP80579 System-On-a-Chip (SOC)
BIOS  Award PnP Flash BIOS
Super I/O  4 x RS-232C (16550 UART kompatibel)
Digital I/O  8 bit Digital I/O Anschluss, per Software programmierbar, TTL Signal
USB  1 x USB-Ports. USB v2.0 Standard
CAN Bus  2 x 9 Pol CAN Bus v2.0b Schnittstelle über Steckkabel
Gigabit Ethernet  3 x Marvell 88E1145 PCI Express G-LAN on Board
IEEE-1588  1 x RJ 45 für Precision Time Protocol (PTP) über Steckkabel
Serial-ATA  1 x Serial ATA on board
Sound  TI PCM2902 (verbunden mit USB Schnittstelle)
Watchdog  Ja, über Software programmierbar (1 - 255 Sekunden)
Solid State Disk (SSD)  1 x Compact Flash Sockel
Hardwareüberwachung  Ja
Stromversorgung  10 Pin ATX Stecker
Relative Luftfeuchtigkeit  10-90%, nicht kondensierend
Betriebstemperatur  0°C ~ 60°C
Abmaße  146 x 105 mm
RoHS konform  Ja
Sonstiges  Produkt hat keine VGA on Board, bitte bspw. ID810 zusätzlich bestellen wenn keine kundenspezifische Lösung vorliegt.
Die technischen Daten sind der Rosch Computer GmbH vom Hersteller übermittelt worden. Für falsche oder fehlerhafte Daten haftet Rosch Computer GmbH nicht. Diese sind auch keine Grundlage für zugesicherte Produkteigenschaften. Für technische Änderungen durch den Hersteller haftet Rosch Computer GmbH nicht.


   +49 6122 17071 50
LinkedIn Facebook X