AI System
// AI System
// Intel Alder Lake / Raptor Lake
// 4 x Display
// 2 x Serial
// 9 x USB (Front page)
// 4 x G-LAN (Front page)
// 1 x PCIe x1
// 1 x PCIe x4
// 3 x PCIe x16
// 3 x M.2 Slot
// 24 to 48 volts
Sales only to business customers.
Delivery time: upon request
Basic Module: Aplex AITAS-MI500
| General information | ||||
| SKU / Item Number | AITAS-MI500 | |||
| Product Basic Data | ||||
| Manufacturer | Aplex | |||
| System | ||||
| Processor | Vertical Segment | Desktop | ||
| Series | Intel Alder Lake / Raptor Lake | |||
| Socket | LGA 1700 (H6) | |||
| Thermal Design Power (TDP) | 65 W | |||
| Chipset | Intel R680E | |||
| Memory | Structure | 288-pin DDR5 DIMM | ||
| Memory Type | DDR5 | |||
| Frequency | 4800 MHz | |||
| Slots | 4 Pce | |||
| Maximum expansion | 128 GB | |||
| Graphics | ||||
| Processor | Intel UHD Graphics | |||
| HDMI | Version | 2.0 | ||
| DisplayPort | Version | 1.4 | ||
| Dual mode | Yes (DP++) | |||
| Extension | ||||
| PCIe x1 | Generation | 3 | ||
| x1 Signal | 1 Pce | |||
| PCIe x4 | Generation | 3 | ||
| x4 signal | 1 Pce | |||
| PCIe x16 | x4 signal | Generation | 3 | |
| Quantity | 1 Pce | |||
| x8 signal | Generation | 4 | ||
| Quantity | 1 Pce | |||
| x16 signal | Generation | 4 | ||
| Quantity | 1 Pce | |||
| PCIe Interfaces | 1x PCIe x1, 1x PCIe x4, 3x PCIe x16 | |||
| M.2 | Slot 1 | Key ID | M | |
| Interface | NVMe, PCIe ×4 (Gen 4) | |||
| Supported dimensions | 2280 | |||
| Slot 2 | Key ID | M | ||
| Interface | NVMe, PCIe ×4 (Gen 4), SATA III | |||
| Supported dimensions | 2280 | |||
| Slot 3 | Key ID | E | ||
| Interface | PCIe ×1 (Gen 3), USB 2.0 | |||
| Supported dimensions | 2230 | |||
| Slot 4 | Key ID | B | ||
| Interface | USB 2.0, USB 3.2 Gen 1 | |||
| Supported dimensions | 3052 | |||
| M.2 Key IDs | E, M | |||
| SIM | Quantity | 1 Pce | ||
| Form Factor (Slot) | Nano SIM | |||
| Storage | M.2 | |||
| Network | ||||
| G-LAN | Controller | Chipset | Intel I226LM PCIe (10/100/1000/2500 Mbps) | |
| Quantity | 3 Pce | |||
| Controller | Chipset | Marvell AQC113 (2.5/5/10 Gbps) | ||
| Quantity | 1 Pce | |||
| Network | 4x G-LAN | |||
| Internal I/O | ||||
| Digital I/O | Bits | 8-bit | 1 Pce | |
| Serial ATA | SATA R3.0 (6 Gbit/s, 600 MB/s) | 4 Pce | ||
| RAID support | RAID 0/1/5/10 | is supported | ||
| RAID support | RAID 0/1/5/10 | |||
| Externe I/O (Front Panel) | ||||
| Display | VGA | 1 Pce | ||
| HDMI | 1 Pce | |||
| DP++ | 2 Pce | |||
| Audio | Line Out | 1 Pce | ||
| Mic-In | 1 Pce | |||
| Ethernet | RJ-45 | 2 Pce | ||
| RJ-45 with PoE | 2 Pce | |||
| Serial | RS-232 / 422 / 485 | DB-9 | 2 Pce | |
| RS-485 | RJ-45 | 1 Pce | ||
| USB | USB 3.2 (Gen 2) | 8 Pce | ||
| USB v3.2 (Gen 2, Type C) | 1 Pce | |||
| Safety | ||||
| Trusted Platform Module (TPM) | v2.0 | |||
| Power Supply | ||||
| Typ (Input) | DC | Wide Range | Yes | |
| Range | 24 to 48 volts | |||
| Connector | 4-pin terminal plug | |||
| PoE (Power over Ethernet) | Connectors | 2 Pce | ||
| Protocol | IEEE 802.3at / 30W | |||
| Power supply - Input | DC: 24 to 48V | |||
| Maximum power consumption | 600 W | |||
| Inserts | ||||
| Internal | 2.5" installation slot | 4 Pce | ||
| Mechanical / Environment | ||||
| Temperature | Operation | 0° to 50°C | ||
| Storage | -40°C to 85°C | |||
| Relative humidity | Operation | 5 to 95%, non-condensing | ||
| Dimensions | Form factor | AI System | ||
| Width | 340 mm | |||
| Deep | 279 mm | |||
| Height | 213 mm | |||
| Vibration | Vibration | 1G, 5 to 500 Hz | ||
| Reference Standard | IEC 68-2-64 | |||
| Shock | Measurement Data | 10G, half sine wave, 11 ms duration | ||
| Reference Standard | IEC 68-2-27 | |||
| Weight | 11000 g | |||
| Controls | Power | 1 Pce | ||
| Status indicators | System Status | 2 Pce | ||
| OS / Software | ||||
| Windows | Windows 11 | Supported | ||
| Windows Embedded | Windows 10 Enterprise IoT LTSC (2021) | wind support | ||
| Linux | Distribution | Ubuntu 20.04, Ubuntu 22.04 | ||
| Supported OS | Windows, Windows Embedded, Linux | |||
| Certificates / Conformities | ||||
| CE | Yes | |||
| FCC | Class A | Yes | ||
| Additional certificates / compliance approvals | LVD (Low Voltage Directive), UKCA | |||
| RoHS compliant | Yes | |||
We are happy to advise you personally.
