ATX Mainboards
// ATX Industrie-Mainboards
// LGA 1700 (H6)
// Intel R680E
// 288 Pin DIMM DDR5
// 2 x G-LAN (Back side)
// 7 x USB (Back side)
// 10 x USB (internal)
// 6 x Seriell I/O
// Digital I/O (8-Bit)
// 2 x PCIe x1
// 5 x PCIe x16
// Power Supply ATX
Verkauf nur an gewerbliche Kunden.
Lieferzeit: auf Anfrage
Basismodul: Avalue BC680R
Allgemein | ||||
SKU / Artikelnummer | BC680R | |||
Produktgrunddaten | ||||
Hersteller | Avalue | |||
System | ||||
Prozessor | Serie | Intel Alder Lake / Raptor Lake | ||
Sockel | LGA 1700 (H6) | |||
Thermal Design Power (TDP) | 65 W | |||
Lithographie | 10 nm | |||
Chipsatz | Intel R680E | |||
Speicher | Aufbau | 288 Pin DIMM DDR5 | ||
Memory Type | DDR5 | |||
Frequenz | 5600 MHz | |||
Steckplätze | 4 St | |||
Maximaler Ausbau | 128 GB | |||
ECC | wird unterstützt | |||
BIOS | AMI UEFI 256 Mbit SPI | |||
I/O Controller | Controller 1 | I/O Controller | Nuvoton NCT6126D | |
Grafik | ||||
Prozessor | Intel UHD Graphics | |||
Bildschirme (Multidisplay) | 4 Displays | |||
HDMI | Maximale Auflösung | 4096 x 2160 bei 60 Hz | ||
Version | 2.0b | |||
Displayport | Maximale Auflösung | 4096 x 2160 bei 60 Hz | ||
Version | 1.4a | |||
Dual Mode | Ja (DP++) | |||
Erweiterung | ||||
PCIe x1 | Generation | 3 | ||
x1 Signal | 2 St | |||
PCIe x16 | x1 Signal | Generation | 3 | |
Anzahl | 1 St | |||
x4 Signal | Generation | 3 | ||
Anzahl | 3 St | |||
x16 Signal | Generation | 5 | ||
Anzahl | 1 St | |||
PCIe Schnittstellen | 2x PCIe x1, 5x PCIe x16 | |||
M.2 | Slot 1 | Key ID | M | |
Interface | NVMe, PCIe ×4, SATA III | |||
Unterstütze Abmaße | 2242, 2280, 22110 | |||
Slot 2 | Key ID | M | ||
Interface | NVMe, PCIe ×4 | |||
Unterstütze Abmaße | 2242, 2280, 22110 | |||
Slot 3 | Key ID | E | ||
Interface | CNVi, PCIe ×1 (Gen. 3), USB 2.0 | |||
Unterstütze Abmaße | 2230 | |||
M.2 Key IDs | E, M | |||
Storage | M.2 | |||
Audio | ||||
Chipsatz | Realtek ALC888S-VD2-GR | |||
Netzwerk | ||||
G-LAN | Controller | Chipsatz | Intel I225LM PCIe (10/100/1000/2500 Mbps) | |
Anzahl | 2 St | |||
Active Management Technology (AMT) Version | 16.0 | |||
Netzwerk | 2x G-LAN | |||
Externe I/O (Rückseite) | ||||
Anzeige | HDMI | 2 St | ||
DP++ | 2 St | |||
Audio | Line-In | 1 St | ||
Line-Out | 1 St | |||
Mic-In | 1 St | |||
Ethernet | RJ-45 | 2 St | ||
USB | USB v3.2 (Gen 2) | 6 St | ||
USB v3.2 (Gen 2, Type C) | 1 St | |||
Interne I/O | ||||
USB | USB v2.0 | Ports (2.54 mm Pitch) | 8 St | |
USB v3.2 | Key-A Header (20-Pin) | 2 St | ||
Generation | Gen. 2 | |||
PS/2 | Stiftleiste | 1 St | ||
Seriell | RS-232 | Ports (2.00 mm Pitch) | 5 St | |
RS-232 / 422 / 485 | Ports (2.00 mm Pitch) | 1 St | ||
Digital I/O | Bits | 8-Bit | 1 St | |
Audio | Anschluss | 2.00 mm Pitch | ||
Amplifier | 2 St | |||
Serial-ATA | S-ATA R3.0 (6 Gbit/s, 600 MB/s) | 4 St | ||
Raid Unterstützung | RAID 0/1/5/10 | wird unterstützt | ||
RAID Unterstützung | RAID 0/1/5/10 | |||
Watchdog Zeitgeber | ||||
Watchdog Zeitgeber | Ja | |||
Watchdog Zeitgeber (Intervall) | Über Software programmierbar (1 - 65535 Sekunden) | |||
Sicherheit | ||||
Trusted Platform Modul (TPM) | Infineon SLB 9670 VQ 2.0 | |||
Stromversorgung | ||||
Typ (Eingang) | ATX | Anschluss | 8-Pin ATX (12V DC), 24-Pin ATX | |
Stromversorgung - Eingang | ATX: 8-Pin ATX (12V DC), 24-Pin ATX | |||
Real-Time Clock (RTC) Batterie | CR2032 Knopfbatterie | |||
Betriebssysteme / Software | ||||
Windows | Windows 10 (64-bit) | wird unterstützt | ||
Windows 11 | Wird unterstützt | |||
Linux | Distribution | Linux | ||
Unterstützte BS | Windows, Linux | |||
Mechanik / Umgebung | ||||
Temperatur | Betrieb | 0° bis 60°C | ||
Lagerung | -20° bis 80°C | |||
Relative Luftfeuchtigkeit | Betrieb | 5 bis 90%, nicht kondensierend | ||
Abmaße | Formfaktor | ATX | ||
Breite | 304,8 mm | |||
Tiefe | 243,84 mm | |||
Gewicht | 850 g | |||
Zertifikate / Konformitäten | ||||
CE | Ja | |||
FCC | Class A | Ja | ||
RoHS konform | Ja |
Gerne beraten wir Sie persönlich.