Mini-ITX Mainboards
// Mini-ITX Industrie-Mainboards
// LGA 1700 (H6)
// Intel R680E
// 262 Pin SO-DIMM DDR5
// LVDS
// 4 x G-LAN (Back side)
// 8 x USB (Back side)
// 4 x USB (internal)
// 5 x Seriell I/O
// Digital I/O (16-Bit)
// 1 x PCIe x16
// Power Supply ATX
Verkauf nur an gewerbliche Kunden.
Lieferzeit: auf Anfrage
Basismodul: Avalue EMX-R680P
Allgemein | ||||
SKU / Artikelnummer | EMX-R680P | |||
Produktgrunddaten | ||||
Hersteller | Avalue | |||
System | ||||
Prozessor | Serie | Intel Alder Lake / Raptor Lake | ||
Sockel | LGA 1700 (H6) | |||
Thermal Design Power (TDP) | 125 W | |||
Chipsatz | Intel R680E | |||
Speicher | Aufbau | 262 Pin SO-DIMM DDR5 | ||
Memory Type | DDR5 | |||
Frequenz | 4800 MHz | |||
Steckplätze | 2 St | |||
Maximaler Ausbau | 64 GB | |||
ECC | wird unterstützt | |||
BIOS | AMI UEFI 256 Mbit SPI | |||
I/O Controller | Controller 1 | I/O Controller | Nuvoton NCT6126D | |
Grafik | ||||
Prozessor | Intel UHD Graphics | |||
Bildschirme (Multidisplay) | 4 Displays | |||
HDMI | Maximale Auflösung | 7680 x 4320 bei 60 Hz | ||
Version | 2.1 | |||
Displayport | Maximale Auflösung | 5120 x 3200 bei 60 Hz | ||
Dual Mode | Ja (DP++) | |||
LVDS | Maximale Auflösung | 1920 x 1080 bei 60 Hz | ||
Bits | 24 Bit | |||
Bridge | Chrontel CH7513A-BF | |||
eDP (embedded Display Port) | Maximale Auflösung | 1920 x 1080 bei 60 Hz | ||
Erweiterung | ||||
PCIe x16 | x16 Signal | Generation | 5 | |
Anzahl | 1 St | |||
PCIe Schnittstellen | 1x PCIe x16 | |||
M.2 | Slot 1 | Key ID | E | |
Interface | PCIe ×2, USB 2.0, WLAN | |||
Unterstütze Abmaße | 2230 | |||
Slot 2 | Key ID | M | ||
Interface | PCIe ×4 (Gen. 4) | |||
Unterstütze Abmaße | 2242, 2280 | |||
Slot 3 | Key ID | M | ||
Interface | PCIe ×4 (Gen. 4) | |||
Unterstütze Abmaße | 2242, 2280 | |||
M.2 Key IDs | E, M | |||
Storage | M.2 | |||
Audio | ||||
Chipsatz | Realtek ALC888S-VD2-GR | |||
Netzwerk | ||||
G-LAN | Controller | Chipsatz | Intel I226LM PCIe (10/100/1000/2500 Mbps) | |
Anzahl | 4 St | |||
Netzwerk | 4x G-LAN | |||
Externe I/O (Rückseite) | ||||
Anzeige | HDMI | 1 St | ||
DP++ | 2 St | |||
Ethernet | RJ-45 | 4 St | ||
USB | USB v3.2 (Gen 1) | 4 St | ||
USB v3.2 (Gen 2) | 4 St | |||
Interne I/O | ||||
USB | USB v2.0 | Ports (2.54 mm Pitch) | 2 St | |
USB v3.1 | Key-A Header (20-Pin) | 2 St | ||
Seriell | RS-232 | Ports (2.00 mm Pitch) | 3 St | |
RS-232 / 422 / 485 | Ports (2.00 mm Pitch) | 2 St | ||
Anzeige | LVDS | Dual Channel | ||
LVDS Interface | 1 St | |||
eDP (embedded Display Port) Lanes | 2 St | |||
Digital I/O | Bits | 16-Bit | 1 St | |
Serial-ATA | S-ATA R3.0 (6 Gbit/s, 600 MB/s) | 2 St | ||
Raid Unterstützung | RAID 0/1 | wird unterstützt | ||
RAID Unterstützung | RAID 0/1 | |||
Watchdog Zeitgeber | ||||
Watchdog Zeitgeber | Ja | |||
Watchdog Zeitgeber (Intervall) | Über Software programmierbar (1 - 65535 Sekunden) | |||
Stromversorgung | ||||
Typ (Eingang) | ATX | Anschluss | 8-Pin ATX (12V DC), 24-Pin ATX | |
Stromversorgung - Eingang | ATX: 8-Pin ATX (12V DC), 24-Pin ATX | |||
Real-Time Clock (RTC) Batterie | CR2032 Knopfbatterie | |||
Mechanik / Umgebung | ||||
Temperatur | Betrieb | 0° bis 55°C | ||
Lagerung | -40° bis 75°C | |||
Relative Luftfeuchtigkeit | Betrieb | 5 bis 95%, nicht kondensierend | ||
Abmaße | Formfaktor | Mini-ITX | ||
Breite | 170 mm | |||
Tiefe | 170 mm | |||
Gewicht | 440 g | |||
Zertifikate / Konformitäten | ||||
CE | Ja | |||
RoHS konform | Ja |
Gerne beraten wir Sie persönlich.